dmesg - Western Digital WD5000AAKX-2

Return To Western Digital WD5000AAKX-2 System Information

Booting Linux on physical CPU 0x0
Initializing cgroup subsys cpu
Linux version 3.19.0-hf-kvm-sriov-64kpage.fc22.aarch64+ (root@linux-010138129056.amd.com) (gcc version 5.1.1 20150422 (Red Hat 5.1.1-1) (GCC) ) #14 SMP Wed Jun 24 14:18:24 AST 2015
CPU: AArch64 Processor [411fd072] revision 2
Detected PIPT I-cache on CPU0
efi: Getting EFI parameters from FDT:
EFI v2.40 by American Megatrends
efi:  ACPI 2.0=0x83ff1dc000  SMBIOS 3.0=0x83ff355898 
Ignoring memory range 0x8000000000 - 0x8001000000
On node 0 totalpages: 261888
  DMA zone: 64 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 65280 pages, LIFO batch:1
  Normal zone: 192 pages used for memmap
  Normal zone: 196608 pages, LIFO batch:1
psci: probing for conduit method from DT.
psci: PSCIv0.2 detected in firmware.
psci: Using standard PSCI v0.2 function IDs
PERCPU: Embedded 2 pages/cpu @fffffe03fc120000 s79552 r8192 d43328 u131072
pcpu-alloc: s79552 r8192 d43328 u131072 alloc=2*65536
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 261632
Kernel command line: BOOT_IMAGE=/vmlinuz-3.19.0-hf-kvm-sriov-64kpage.fc22.aarch64+ root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/swap rd.lvm.lv=fedora/root
PID hash table entries: 4096 (order: -1, 32768 bytes)
Dentry cache hash table entries: 2097152 (order: 8, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 7, 8388608 bytes)
Memory: 16645056K/16760832K available (7189K kernel code, 709K rwdata, 3904K rodata, 512K init, 910K bss, 115776K reserved, 0K cma-reserved)
Virtual kernel memory layout:
                   vmalloc : 0xfffffc0000000000 - 0xfffffdfedfff0000   (  2043 GB)
                   vmemmap : 0xfffffdfee0000000 - 0xfffffdffe0000000   (     4 GB maximum)
                             0xfffffdff00004000 - 0xfffffdff01000000   (    15 MB actual)
                   PCI I/O : 0xfffffdfffa000000 - 0xfffffdfffb000000   (    16 MB)
                   fixed   : 0xfffffdfffbdd0000 - 0xfffffdfffbdf0000   (   128 KB)
                   modules : 0xfffffdfffc000000 - 0xfffffe0000000000   (    64 MB)
                   memory  : 0xfffffe0000000000 - 0xfffffe03ff000000   ( 16368 MB)
                     .init : 0xfffffe0000b70000 - 0xfffffe0000bf0000   (   512 KB)
                     .text : 0xfffffe0000080000 - 0xfffffe0000b655c4   ( 11158 KB)
                     .data : 0xfffffe0000c00000 - 0xfffffe0000cb1600   (   710 KB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
	RCU dyntick-idle grace-period acceleration is enabled.
NR_IRQS:64 nr_irqs:64 0
GICv2m: Node v2m: range[0xe1180000:0xe1180fff], SPI[0:0]
NO_HZ: Clearing 0 from nohz_full range for timekeeping
NO_HZ: Full dynticks CPUs: 1-7.
	Offload RCU callbacks from all CPUs
	Offload RCU callbacks from CPUs: 0-7.
Architected cp15 timer(s) running at 250.00MHz (phys).
sched_clock: 56 bits at 250MHz, resolution 4ns, wraps every 2199023255552ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 500.00 BogoMIPS (lpj=2500000)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 32768 (order: 2, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 2, 262144 bytes)
Initializing cgroup subsys perf_event
/cpus/cpu-map/cluster0/core0: could not find phandle
/cpus/cpu-map/cluster0/core0: Can't get CPU for leaf core
hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 7 counters available
Remapping and enabling EFI services.
Freed 0x1fe0000 bytes of EFI boot services memory
CPU1: Booted secondary processor
Detected PIPT I-cache on CPU1
CPU2: Booted secondary processor
Detected PIPT I-cache on CPU2
CPU3: Booted secondary processor
Detected PIPT I-cache on CPU3
CPU4: Booted secondary processor
Detected PIPT I-cache on CPU4
CPU5: Booted secondary processor
Detected PIPT I-cache on CPU5
CPU6: Booted secondary processor
Detected PIPT I-cache on CPU6
CPU7: Booted secondary processor
Detected PIPT I-cache on CPU7
Brought up 8 CPUs
SMP: Total of 8 processors activated.
devtmpfs: initialized
SMBIOS 3.0 present.
xor: measuring software checksum speed
   8regs     :  6419.200 MB/sec
   8regs_prefetch:  5427.200 MB/sec
   32regs    :  6489.600 MB/sec
   32regs_prefetch:  6003.200 MB/sec
xor: using function: 32regs (6489.600 MB/sec)
NET: Registered protocol family 16
vdso: 2 pages (1 code @ fffffe0000c20000, 1 data @ fffffe0000c10000)
hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
software IO TLB [mem 0x8018000000-0x801c000000] (64MB) mapped at [fffffe0017000000-fffffe001affffff]
DMA: preallocated 256 KiB pool for atomic allocations
console [ttyAMA0] enabled
of_amba_device_create(): amba_device_add() failed (-19) for /smb/gpio@e0020000
raid6: int64x1   3805 MB/s
raid6: int64x2   5060 MB/s
raid6: int64x4   6348 MB/s
raid6: int64x8   3208 MB/s
raid6: neonx1    5052 MB/s
raid6: neonx2    6457 MB/s
raid6: neonx4    6384 MB/s
raid6: neonx8    6217 MB/s
raid6: using algorithm neonx2 (6457 MB/s)
raid6: using intx1 recovery algorithm
ACPI: Interpreter disabled.
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
ssp-pl022 e1020000.ssp: ARM PL022 driver, device ID: 0x00241022
ssp-pl022 e1020000.ssp: probe: no chip select defined
ssp-pl022 e1030000.ssp: ARM PL022 driver, device ID: 0x00241022
ssp-pl022 e1030000.ssp: mapped registers from 0x00000000e1030000 to fffffc00002e0000
of_dma_request_slave_channel: dma-names property of node '/smb/ssp@e1030000' missing or empty
ssp-pl022 e1030000.ssp: Failed to work in dma mode, work without dma!
i2c_designware e1000000.i2c: timeout in disabling adapter
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
PTP clock support registered
Switched to clocksource arch_sys_counter
pnp: PnP ACPI: disabled
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 4, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 4, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 2, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 2, 262144 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Unpacking initramfs...
i2c_designware e1000000.i2c: timeout in disabling adapter
Freeing initrd memory: 12288K (fffffe03fa840000 - fffffe03fb440000)
kvm [1]: interrupt-controller@e1140000 IRQ13
kvm [1]: timer IRQ3
kvm [1]: Hyp mode initialized successfully
futex hash table entries: 2048 (order: 1, 131072 bytes)
HugeTLB registered 512 MB page size, pre-allocated 0 pages
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
JFS: nTxBlock = 8149, nTxLock = 65195
SGI XFS with security attributes, no debug enabled
9p: Installing v9fs 9p2000 file system support
bounce: pool size: 64 pages
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
arm-ccn e8000000.ccn: No access to interrupts, using timer.
pl061_gpio e1050000.gpio: PL061 GPIO chip @0x00000000e1050000 registered
pl061_gpio e0030000.gpio: PL061 GPIO chip @0x00000000e0030000 registered
pl061_gpio e0080000.gpio: PL061 GPIO chip @0x00000000e0080000 registered
PCI host bridge /smb/pcie@f0000000 ranges:
   IO 0xefff0000..0xefffffff -> 0x00000000
  MEM 0x40000000..0xbfffffff -> 0x40000000
  MEM 0x100000000..0x7fffffffff -> 0x100000000
pci-host-generic f0000000.pcie: PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-7f]
pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x40000000-0xbfffffff]
pci_bus 0000:00: root bus resource [mem 0x100000000-0x7fffffffff]
pci 0000:00:00.0: [1022:1a00] type 00 class 0x060000
pci 0000:00:00.0: of_irq_parse_pci() failed with rc=-19
pci 0000:00:02.0: [1022:1a01] type 00 class 0x060000
pci 0000:00:02.0: of_irq_parse_pci() failed with rc=-19
of_dma_request_slave_channel: dma-names property of node '/smb/serial@e1010000' missing or empty
loop: module loaded
ahci e0300000.sata: SSS flag set, parallel bus scan disabled
ahci e0300000.sata: AHCI 0001.0300 32 slots 8 ports 6 Gbps 0xff impl platform mode
ahci e0300000.sata: flags: 64bit ncq sntf stag led clo only pmp pio ccc apst 
scsi host0: ahci_platform
scsi host1: ahci_platform
scsi host2: ahci_platform
scsi host3: ahci_platform
scsi host4: ahci_platform
scsi host5: ahci_platform
scsi host6: ahci_platform
scsi host7: ahci_platform
ata1: SATA max UDMA/133 mmio [mem 0xe0300000-0xe03effff] port 0x100 irq 14
ata2: SATA max UDMA/133 mmio [mem 0xe0300000-0xe03effff] port 0x180 irq 14
ata3: SATA max UDMA/133 mmio [mem 0xe0300000-0xe03effff] port 0x200 irq 14
ata4: SATA max UDMA/133 mmio [mem 0xe0300000-0xe03effff] port 0x280 irq 14
ata5: SATA max UDMA/133 mmio [mem 0xe0300000-0xe03effff] port 0x300 irq 14
ata6: SATA max UDMA/133 mmio [mem 0xe0300000-0xe03effff] port 0x380 irq 14
ata7: SATA max UDMA/133 mmio [mem 0xe0300000-0xe03effff] port 0x400 irq 14
ata8: SATA max UDMA/133 mmio [mem 0xe0300000-0xe03effff] port 0x480 irq 14
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
rtc-efi rtc-efi: rtc core: registered rtc-efi as rtc0
device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
device-mapper: multipath: version 1.7.0 loaded
device-mapper: multipath round-robin: version 1.0.0 loaded
Driver 'mmcblk' needs updating - please use bus_type methods
mmc_spi spi32766.0: SD/MMC host mmc0, no WP, no poweroff, cd polling
EFI Variables Facility v0.08 2004-May-17
ip_tables: (C) 2000-2006 Netfilter Core Team
arp_tables: (C) 2002 David S. Miller
TCP: cubic registered
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
Bridge firewalling registered
9pnet: Installing 9P2000 support
NET: Registered protocol family 37
Btrfs loaded
rtc-efi rtc-efi: setting system clock to 2000-03-11 05:50:45 UTC (952753845)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-8: WDC WD5000AAKX-22ERMA0, 17.01H17, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000AAKX-2 1H17 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
Freeing unused kernel memory: 512K (fffffe0000b70000 - fffffe0000bf0000)
random: systemd urandom read with 33 bits of entropy available
systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture arm64.
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
systemd[1]: Created slice -.slice.
systemd[1]: Starting -.slice.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Starting Journal Socket (/dev/log).
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Created slice System Slice.
systemd[1]: Starting System Slice.
systemd[1]: Started dracut ask for additional cmdline parameters.
systemd[1]: Reached target Slices.
systemd[1]: Starting Slices.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Starting Journal Service...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Starting system-systemd\x2dfsck.slice.
systemd[1]: Reached target Timers.
systemd[1]: Starting Timers.
systemd[1]: Started Setup Virtual Console.
systemd[1]: Reached target Swap.
systemd[1]: Starting Swap.
systemd[1]: Started Load Kernel Modules.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Reached target Sockets.
systemd[1]: Starting Sockets.
systemd[1]: Reached target Local File Systems.
systemd[1]: Starting Local File Systems.
systemd[1]: Starting dracut cmdline hook...
systemd[1]: Started Journal Service.
XFS (dm-1): Mounting V4 Filesystem
XFS (dm-1): Starting recovery (logdev: internal)
XFS (dm-1): Ending recovery (logdev: internal)
systemd-journald[159]: Received SIGTERM from PID 1 (systemd).
systemd-sysv-generator[425]: Overwriting existing symlink /run/systemd/generator.late/netconsole.service with real service
systemd-sysv-generator[425]: Overwriting existing symlink /run/systemd/generator.late/network.service with real service
systemd-journald[453]: File /var/log/journal/9739fa8e15da4195b39e0d402a74325b/system.journal corrupted or uncleanly shut down, renaming and replacing.
systemd-journald[453]: Failed to set file attributes: Operation not supported
random: nonblocking pool is initialized
systemd-journald[453]: Received request to flush runtime journal from PID 1
libphy: amd_xgbe_phy: probed
amd-xgbe e0700000.xgmac eth0: net device enabled
libphy: amd_xgbe_phy: probed
amd-xgbe e0900000.xgmac eth1: net device enabled
Adding 8323008k swap on /dev/mapper/fedora-swap.  Priority:-1 extents:1 across:8323008k 
XFS (dm-2): Mounting V4 Filesystem
XFS (dm-2): Ending clean mount
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
amd-xgbe e0700000.xgmac eth0: 4 Tx queues, 16384 byte fifo per queue
amd-xgbe e0700000.xgmac eth0: 4 Rx queues, 16384 byte fifo per queue
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
amd-xgbe e0900000.xgmac eth1: 4 Tx queues, 16384 byte fifo per queue
amd-xgbe e0900000.xgmac eth1: 4 Rx queues, 16384 byte fifo per queue
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
amd-xgbe e0700000.xgmac eth0: Link is Down
amd-xgbe e0900000.xgmac eth1: Link is Down
amd-xgbe e0700000.xgmac eth0: Link is Up - 1Gbps/Full - flow control off
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
systemd-journald[453]: Failed to set file attributes: Operation not supported
python (3226): drop_caches: 3
python (3226): drop_caches: 3
python (3434): drop_caches: 3
python (3434): drop_caches: 3
python (3551): drop_caches: 3
python (3551): drop_caches: 3
python (19190): drop_caches: 3
python (19190): drop_caches: 3
python (19438): drop_caches: 3
python (19438): drop_caches: 3
python (19543): drop_caches: 3
python (19543): drop_caches: 3
python (22907): drop_caches: 3
python (22907): drop_caches: 3
python (23117): drop_caches: 3
python (23117): drop_caches: 3
python (23466): drop_caches: 3
python (23466): drop_caches: 3
python (3755): drop_caches: 3
python (3755): drop_caches: 3
python (4108): drop_caches: 3
python (4108): drop_caches: 3
python (4332): drop_caches: 3
python (4332): drop_caches: 3
python (15932): drop_caches: 3
python (15932): drop_caches: 3
python (16248): drop_caches: 3
python (16248): drop_caches: 3
python (16338): drop_caches: 3
python (16338): drop_caches: 3

Return To Western Digital WD5000AAKX-2 System Information